|
| Author |
Message |
|
sedted
|
Post subject: Problem when using two boxes, one at a time works  Posted: Fri Mar 19, 2010 12:05 pm |
|
Joined: Thu Sep 17, 2009 1:13 am
Posts: 2
|
|
I have a Dreambox 600PVR C and Humax CXHD-1000C and it has worked fine with Smartwi until a few weeks ago.
Now I have a strange problem. When I test the smartwi with one box at time it works fine but as soon I use both boxes it stops works on one box(the Dreambox).
I have tried with most smartwi versions.
|
|
|
|
 |
|
sedted
|
Post subject: Re: Problem when using two boxes, one at a time works Posted: Sat Apr 10, 2010 4:52 pm |
|
Joined: Thu Sep 17, 2009 1:13 am
Posts: 2
|
|
It works again. But now is not the card updated(emm update) so I have to move the card to the box some times a month.
|
|
|
|
|
|
pokker
|
Post subject: Re: Problem when using two boxes, one at a time works Posted: Thu Apr 29, 2010 7:58 pm |
|
Joined: Thu Apr 29, 2010 7:50 pm
Posts: 1
|
|
I got the same problem... Smartwi works just fine with one STB at the time... But as soon as I insert a 2nd card in an other STB the first STB stops working.
To get the first STB going again I need to remove and reconnect the original card from the master unit.... but the the 2nd STB stops.
I use Conax and ComHem ... got one motorola and one samsung box (also got a CA module for the TV but its the same problem with the CA module)
One unit at the time is ok with smartwi... if i connect 2 or 3 client cards then only one will work.
Don't know how to crack this nut please help
|
|
|
|
|
|
|
